HB_MR-16

Home About Why LEDS Information Products Privacy Policy Contact

MR16-HB25

Features

High brightness.

Long operating life (up to 50k hours).

Multiple color

MR16 compatible with DC 12V Transformer;

Energy efficiency (Total Consumption 5.0W).

Fast electrical response.

Very compact.

Compatible with 40 Watt MR16

Applications

General reading lighting source

Decoration light source

Interior lamp

Landscape

Entertainment Lighting

Spotlight for jewelry or other similar products

1. Beam Angle 25° -Non Sphere Lens

Picture Above using HB25 Series Warm white-Spot light- 25 Degree Narrow Beam

2. Beam Angle 120° Optical Diffuser

CREE

Technical Specifications

Parameters	Beam Angle 25°	Beam Angle 120°
Net Weight	50 g	45 g
Dimension	Ǿ 49.0 x 35.5 mm	Ǿ 49.6 x 35.5 mm
Bulb Type	MR 16	MR 16
Bulb Head	GZ 5.3	GZ 5.3
LED Source	Nichia & Cree	Nichia & Cree
LED power consumption	3.3 W & 3.9 W	3.3 W & 3.9 W
Total Power consumption	4.2 W & 4.8 W	4.2 W & 4.8 W
Current	3x 300 mA & 3 x 350 mA	3 x 300 mA & 3 x 350 mA
Input Voltage Range	A/C D/C 12 V	A/C D/C 12 V
Beam Angle	25°	120°
Average Life (Hours)	25000~50000	25000~50000

Color Characteristics

Color Temperature / Wavelength	Nichia (Lumens)	Cree (Lumens)
White 5000 ~ 6900 K	270	270
Warm White 2800 ~ 3300 K	240	210
Red 615 ~ 630 nm
Green 520 ~ 530 nm
Blue 460 ~ 470 nm
Amber 580 ~ 585 nm

Pattern Distribution

Beam Angle 25°

Beam Angle 120°

Measured using Cree LED 5000K ~ 6900 K-Pure white / Nichia 2800K~3600K-Warm White

Beam Angle	0.5 M Lux	1.0 M Lux	2 M Lux	2.5 M Lux	Intensity Cd
25°	2800/2200	700/640	200/160	100/80	700
120°	400/320	110/90	30/25	15/10	200

Electrical Characteristics

Model/Beam	IF Input Voltage	Working Voltage	Typical Power Consumption (Watt)	Typical Power Consumption (Watt)	Operating Temperature (Centigrade)
Nichia 25°	12 V DC	12 V DC	3.3	4.2	-40° ~ 45°
Nichia 120°	12 V AC	12 V AC/DC	3.6	4.5	-40° ~ 45°
Cree 25°	12 V DC	12 V DC	3.8	4.8	-40° ~ 45°
Cree 120°	12 V AC	12 V AC/DC	4.0	5.0	-40° ~ 45°

Mechanical Dimension

Important Note: Before you buy our high quality and high brightness lamps

Just as all LED power lamps Appropriate Ventilation in the fixture is required to enable the device to cool.

Failure to do so would over heat the lamps and this would not only damage the lamp but may also result in malfunction of the device.

Canada LEDS is not responsible in any way if damage or malfunction of the bulb takes place due to misuse.

Avoid plugging in the bulb which is sealed and does not allow air flow.

For best results please ensure that the fixture is open from below (or front) and has vents above (or at the back) of the fixture.

Compatibility with Transformers

Magnetic and electronic: Consider the following when selecting the appropriate transformer use with the LED bulb. –

Magnetic: The LED bulb is compatible with all types of magnetic transformers used with 12 volt lighting. Additionally, magnetic transformers are more reliable than electronic transformer; however, magnetic transformers are heavier, less efficient, and sometimes buzz.

Electronic: The LED bulb is not compatible with all of electronic transformers due to the output voltage of this kind of transformer is not always constant voltage. We are also happy to say that our Slim Line series was designed to be compatible with most of the electronic transformers. However, the incompatibilities do exist with a few of electronic transformers - Symptoms of incompatibility include: no light output, flickering, strobe, or random shutdown.

Note of Caution:

Although our MR16-HB25 bulbs are suitable for both indoor and outdoor application, extreme care should be taken in wet conditions when working with mains powered devices. Power supplies issued with these products should be UL/CE/FCC listed or similarly approved device. These products are not intended to be waterproof and cannot be used in submerged applications.

Product Warranty:

CANADA LEDS warrants product and workmanship, which may lead to failure of the bulb to transmit light. During the warranty period, if the product fails to perform as described above,

CANADA LEDS entire liability will be the repair or replacement of such defective product. In no event shall CANADA LEDS be responsible for removal or reinstallation of any product or for the expenses thereof.

The above warranty does not apply to, and CANADA LEDS makes no warranties with respect to products which have been subjected to misuse neglect, accident, abuse, or operating or environment conditions that deviate from the parameters established in applicable specifications; or have been improperly installed, stored, maintained, repaired or altered by anyone other than CANADA LEDS; This warranty is given only to the original purchase and may not be assigned or transferred to any other party. It is purchaser’s obligation to retain documentation that indicated date of purchase.

Safety and Environmental Specification

HB25 MR16 bulbs are manufactured to conform to the following safety criteria for CE approbations & RoHS:

EMC: ASCE06210 ASCE06187

RoHS: BTRS0605180105 Test Standard: 2002/95/EC; EPA3050B:1996, EN1122:2001, EPA3052:1996, EPA3060A, EPA7196, EPA3540C, EPA8270C

Finally: When you purchase the above lamps you have read our terms and conditions and agree to abide by them.

Nichia

Cree

Copyright © 2003-2008 Canada LEDS